Grafting method of Huangjuelan

Article Catalog

1. Select rootstock and scion

2. Treat the incision

3. Grafting

4. Grafting management

---

When grafting Huangjuelan, you can choose Magnolia or Huanglan as rootstock, and the scion should also be in a healthy state. Make a small cut at the base of the rootstock, and also cut the scion, and the cut should be smooth. After that, align the rootstock cut with the scion, and wrap it so that it does not come into contact with water or direct sunlight.

1. Select rootstock and scion

1. Select rootstock and scion

When grafting, you must choose the rootstock well. You can use magnolia with a thickness of more than 5mm, or yellow orchid as the rootstock. The scion must be in a healthy state, otherwise the grafting rate will be affected.

2. Processing the incision

Preparation Use a pair of scissors to make an incision at the base of the stock. The incision should be rectangular, with a length of 1-1.5cm and a width of 3-5mm. Moreover, the scion also needs to be cut with such an incision. When cutting the incision, it is necessary to make the incision smoother. It is best to cut it with one knife.

3. Grafting

In The method of grafting is very simple. You need to align the cut of the rootstock with the scion and tightly combine the two. After that, wrap the incision with film and tie it tightly, otherwise moisture will cause the joint to rot.

4. Grafting management

After grafting, do not allow it to touch the water, and do not spray water on the plants. During the rainy season, pay attention to shelter from rain. The soil needs to be slightly moist and protected from direct sunlight for long periods of time.

2. Treat the incision

3. Grafting

4. Grafting management

- END -