Tangyin leaf inserting tutorial

Article Catalog

1. Cutting time

2. Cut the leaves

3. Prepare soil

4. Carry out leaf cuttings

5. Post-maintenance

---

It is recommended to take cuttings from Tangyin in spring or autumn. Choose a plant that is healthy and in good growth condition, cut off the vigorous leaves from the base of the leaves, place them in a well-ventilated place to dry, and apply plant ash on the cuts. Prepare soil with leaf mold, fine sand, vermiculite, etc., and disinfect it before use. After preparation, spray water into the soil appropriately, then insert the leaves into it for later maintenance.

1. Cutting time

1. Cutting time

Tang Yin recommends cutting in spring or autumn. In these two seasons, the temperature is very mild and there is no extreme weather. It is suitable for cutting and has a high survival rate.

2. Cut the leaves

< p> First prepare a pair of sterilized sharp scissors, choose Tangyin that is healthy and in good growth status, cut off the vigorous leaves from the plant, cut them from the base of the leaves, place them in a well-ventilated place to dry, and place them on the incisions. Apply plant ash to prevent sap from flowing out, and it can also disinfect. After drying for a period of time, the incision will heal and cuttings can be made.

3. Preparing the soil

In the process of drying the leaves, you can prepare the soil, which requires looseness, air permeability, and normal drainage. Mix it with leaf mold soil, fine sand, vermiculite, etc. Prepare and sterilize before use. Be careful not to use clay, otherwise the cuttings will not survive.

4. Carry out leaf transplantation

< p>After preparation, spray water appropriately into the soil to keep it slightly moist, and then insert the leaves into it, not too deep.

5. Later maintenance

After cutting, place it in a cool and ventilated place. Do not expose it to strong light and pay attention to the normal circulation of air. Spray water once every 3 to 5 days, and roots will take root in about half a month.

2. Cut the leaves

3. Prepare soil

4. Carry out leaf cuttings

5. Post-maintenance

- END -