How to behead a flying dragon

Article Catalog

1. Preparation tools

2. Find the correct location

3. Start beheading

4. Follow-up operations

---

Before beheading Feilong, you must first prepare a sharp knife, as well as carbendazim or plant ash for sterilization and disinfection. In order to prevent being stabbed, you can prepare a pair of gloves. The location of the beheading should be determined based on the condition of the head. If the overgrowth is too long, the location should be toward the root. If the overgrowth is light, the location should be toward the top. When cutting, take one step to ensure the wound is smooth. The cut parts can be inserted into the sand bed for cultivation. The wounds of the old plants should be kept away from water.

1. Preparation tools

1. Preparing tools

Before beheading, you must first prepare suitable tools. Because its stem is relatively thick, scissors are not suitable and it is easy to squeeze and cause scars. You can prepare a sharp knife, which must be sterilized and cannot be used directly. Also prepare carbendazim or plant ash for sterilization and disinfection, which can be easily applied to the wound for sterilization. There are sharp thorns all over the plant. To prevent being stabbed, you can prepare a pair of gloves.

2. Find the correct location

The reason for beheading is usually because it has become too long, resulting in a high height that affects the ornamental quality. Therefore, the location should be determined based on the condition of the head. If the degree of overgrowth is serious, the location can be skewed towards the root and the upper end can be elongated. If the length is slight, the position can be toward the top and the upper part can be cut off less.

3. Beheading

After putting on gloves, hold the top of the plant, and use the other hand to hold the knife and cut it according to the selected position. When cutting, you should do it in one step, cleanly and neatly, to ensure that the wound is smooth.

4. Follow-up operations

The cut part can be slightly dried and then inserted into a sand bed for cultivation. For old plants that have been beheaded, avoid getting water on the wound.