How to behead ash wood

Article Catalog

1. Preparation tools

2. Beheading

3. Maintenance and management

4. Used as cuttings

---

Before beheading the ash wood, prepare tools first, observe the growth status of the plant, determine the position of beheading, and cut it off with a knife to ensure a smooth cut. Be careful not to get water on the wound, and apply carbendazim on the wound. First put it in a place with astigmatism for curing, and the cut parts can be used as cuttings.

1. Preparation tools

1. Prepare tools

Before beheading ash wood, you must first prepare tools. It is best to use a sharp knife, such as a utility knife. Because using scissors may cause squeezing damage to the wound, thus affecting the wound. And it must be disinfected before use to avoid wound infection.

2. Beheading

Observe the growth status of the entire plant and determine the location for beheading. When the ash grows to a certain height, if it is not cut back in time, it will be difficult to branch, and the entire plant shape will not look good. After determining the beheading position, use a knife to chop it off quickly and neatly to ensure a smooth incision.

3. Maintenance and management

Attention The wound after beheading should not be exposed to water to prevent water from infecting the incision. Carbendazim can be applied to the wound to disinfect and sterilize it. First place it in a place with astigmatism for maintenance. After a period of time for it to adapt, you can move it to a sunny place and receive normal sunlight.

4. Use as cuttings

As for the part that was beheaded, it can be used as cuttings. Let the incision dry slightly, then prepare the matrix and insert this part into the matrix.