What to do if the iron ball is watered too much

Article Catalog

1. Solution

2. Methods to determine whether there is water shortage

---

If you water it too much, pour out the water immediately and place the potted plant in a well-ventilated place, or place the pot elevated by a window. If the soil has not been turned over for a long time, the soil will become hard and the water will not evaporate. You can turn the soil with a small shovel to better promote the evaporation of water. It's best to know how to detect water shortages so you don't let water accumulate in the soil.

1. Solution

1. Solution

1. When you find that you have poured too much water on the iron-clad ball, what you need to do is to pour out the water immediately, and then put the potted plant in a place with good air circulation. The moisture contained in the soil will be dissipated. Or just raise the flower pot and place it by the window, balcony, etc.

2. Sometimes the soil may not be turned over for a long time. It will become very hard, and it will be difficult for the moisture in the basin to escape. Therefore, you can use a clean small shovel to turn over the soil at this time. After the soil becomes loose, the accumulated water will dissipate quickly. But it should be noted that you must not damage its root system during soil plowing, so be careful.

2. Methods to determine whether there is water shortage

< p>If you want to prevent the occurrence of water accumulation, you should master the method of judging whether there is a lack of water. Watering should be done after the soil is completely dry, so you can use chopsticks to judge. Insert the chopsticks into the soil at the edge of the pot, wait for a while and then take it out to check whether it is dry. If it is dry, you can replenish water. .

2. Methods to determine whether there is water shortage

- END -