Hyacinth breeding methods and precautions, pictures of hyacinth

Article Catalog

1. Check and repair roots

2. Dry naturally

3. Aquaculture maintenance

4. Precautions

5. Appreciation of hyacinth pictures

---

The most common method of cultivating hyacinths is hydroponics. Usually, hyacinth bulbs are purchased. After purchase, they need to be trimmed, sterilized, and dried before being placed in bottles. During hydroponics, keep the seed bulbs 0.2cm away from the water. Change the water frequently before taking root. Change the water again after taking root. No need to fertilize. Wait two or three months for the hyacinths to draw arrows. Give them a certain amount of time when drawing roots. The high temperature prevents the occurrence of pinched arrows.

1. Check and repair roots

1. Check and trim the roots

The hyacinths we buy are usually in the bulb state. We cut off the shriveled fibrous roots on the root plate of the bulbs and check if there are any moldy areas. If Use a knife to cut off the moldy areas and soak them in carbendazim (diluted 1000 times) for half an hour.

2. Dry naturally

Take out the soaked bulbs, place them in a cool and ventilated place, and let the wounds dry completely. If the hyacinth bulbs are not dry after inspection, The roots need to be trimmed, and there is no need to soak them with carbendazim. They can be directly thrown into a hydroponic bottle for hydroculture.

3. Aquaculture care

< p>1. How to handle hydroponics: Place the processed hyacinth bulbs on the hydroponic bottle with the root system facing down. Add water to the hydroponic bottle so that the water surface is preferably 0.2cm away from the root plate of the bulbs, and should be closer. Also make sure the root disk is not soaked in water.

2. Pre-rooting maintenance: Change the water frequently before the bulbs take root. You can wrap the bottle with a black plastic bag and keep the temperature at 5-10℃ to promote the rapid rooting of the bulbs. Remove the plastic bag after the bulbous system has filled the hydroponic bottle.

3. Maintenance after rooting: After the seed bulbs take root, you only need to ensure that the water in the bottle is clean and change the water when it is muddy. Wait two or three months for the hyacinths to bloom and the fragrance will be full. Room.

IV. Precautions

1. When handling hyacinth bulbs, you must wear gloves and do not directly touch the juice inside the bulbs with your hands, which may cause itching and allergies.

2. When the hyacinth is drawing an arrow, give it a certain high temperature to prevent the arrow from being pinched. Once the hyacinth is pinching the arrow, you can put the hyacinth into a small dark room and let the arrows stretch out. Get rid of the trouble of pinching arrows.

5. Appreciation of Hyacinth Pictures